VP12/70 1/2” gas
A 2 vie N.C.
attacco per flangia CAYRE
con comando a pistone
Funzionante con valvola di comando FESTO
Valvola adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi. Si può montare sia in verticale che in orizzontale. Funziona con una valvola di comando (FESTO) montata sulla parte superiore. La valvola a due vie N.C. apre il passaggio dando corrente alla valvola Festo che fa entrare l’aria di comando (min 4 Max 10 bar) mentrela chiusura è affidata a una molla.
comando a pistone ø 51.
Categorie: Valvola pneumatica, Valvole a 2 vie N.C.
Tag: Valvola a 2 vie N.C., Valvola pneumatica
Prodotti correlati
VPM/Fi DN15 (1/2”) DN20 (3/4”) – DN25 (1”) – DN32 (1”1/4) – DN40 (1”1/2) – DN50 (2”) gas
[:it]A 2 vie N.C.
attacco flangiato
con comando a membrana
Valvola che consente il controllo di liquidi e gassosi a pressioni elevate con pressioni di comando anche ridotto. Valvola adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi. La valvola è dotata di una membrana ø160 spessore 4mm. Valvola anti-colpo d’ariete, se accessoriata di ammortizzatore. Tutte le parti esterne in ghisa e ottone sono trattate con vernice epossidica controsi agenti atmosferici. Può essere montata sia in verticale sia in orizzontale. La testa di comando può essere orientata a 360°. La valvola a due vie N.C. apre il passaggio facendo pervenire una pressione sulla parte pneumatica (aria, acqua, olio, gas inerti ecc.) min.4 max 7 Bar, mentre la chiusura è affidata ad una robusta molla.
Scarica la scheda[:en]2-way N.C.
flanged connection
diaphragm operated
Valve created to allow control of high pressure fluids and gases even with low control pressure. Valve designed for air, inert gases, water, refrigerants, diesel and very dense oils. It comes with a 4 mm thick ø160 diaphragm.
This valve is water hammer safe if equipped with a shock absorber.
All the external cast iron and brass parts are epoxy coated to ensure corrosion resistance. It can be mounted either vertically or horizontally. The operator is 360° rotatable. The 2-way N.C. valve closes the passage allowing pressure (min. 4 max 7 bar) on the pneumatic part (air, water, oil, inert gases etc.), while the closure is regulated by a sturdy spring.
Download the card[:]
VPM/90.DE 3/4” – 1” – 1”1/4 gas
[:it]A doppio effetto adatta per evitare colpi d’ariete
A 2 vie N.C.
attacco filettato
con comando a pistone
Funzionante con valvola di comando FESTO (a richiesta)
Questa valvola è stata creata per evitare i colpi di ariete. Essa è adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi.
Questa è una valvola pneumatica con comando a pistone a doppio effetto.
Si può montare sia in verticale che in orizzontale. Essa funziona con una valvola di comando (FESTO) montata sulla parte superiore.
La valvola è a due vie Normalmente Chiusa (N.C). Si chiude il passaggio dando corrente alla valvola Festo che fa entrare l’aria di comando ( min 4 Max 10 bar) e apre la sede . Togliendo la corrente la valvola si chiude e l’aria di comando garantisce la chiusura.
Comando a pistone ø70.
Scarica la scheda[:en]A doppio effetto adatta per evitare colpi d’ariete
2-way N.C.
threaded connection
Piston operated
FESTO control valve operated (on demand)
This valve was created to avoid water hammer. It is suitable for air, inert gases, water, refrigerants, diesel and very dense oils. This is a pneumatic valve actuated by a double effect piston. It can be mounted either vertically or horizontally.
A control valve (FESTO) is mounted on the top part. This is a 2-way Normally Closed (N.C.) valve, by energizing the Festo valve through current the supply air (min 4 Max 10 bar) opens the passage. The supply air closes the valve when it is de-energized.
Piston operated - diameter ø70.
Download the card[:]
VKLP/85 3/4” – 1” – 1”1/4 gas
[:it]A 2 vie N.C.
attacco manicotto
con comando a pistone
Valvola adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi.
Valvola con elettrovalvola pilota integrata e comando a pistone ø64.
Il pistone maggiorato garantisce una maggiore sicurezza alle alte pressioni, anche con pressioni di pilotaggio basse. Può essere montata sia in verticale sia in orizzontale. La bobina può essere orientata a 360°. La valvola a due vie N.C. apre il passaggio eccitando la bobina, che fa entrare l’aria di comando, mentre la chiusura è affidata a una molla. Completa di connettore maschio e femmina con led.
Scarica la scheda[:en]2-way N.C.
sleeve connection
piston operated
Piloted solenoid valve, with ø64 piston, designed for air, inert gases, water, refrigerants, diesel and very dense oils. The big-bore piston ensures better safety at high pressure, even with low pilot pressure. It can be mounted either vertically or horizontally. The coil is 360° rotatable. The N.C. (Normally Closed) 2-way valve allows the supply air to pass energizing the coil, while the closure is regulated by a spring. Led equipped male and female connectors included.
Download the card[:]
VP20.DE (3/4” gas) – VP25.DE (1” gas) VP30.DE (1”1/4 gas)
[:it]A doppio effetto adatta per evitare colpi d’ariete
A 2 vie N.C.
attacco per flangia CAYRE
con comando a pistone
Funzionante con valvola di comando FESTO
Questa valvola è stata creata per evitare i colpi di ariete. Essa è
adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi.
Questa è una valvola pneumatica con comando a pistone a doppio effetto.
Si può montare sia in verticale che in orizzontale. Essa funziona con una valvola di comando (FESTO) montata sulla parte superiore.
La valvola è a due vie Normalmente Chiusa (N.C). Si chiude il
passaggio dando corrente alla valvola Festo che fa entrare
l’aria di comando ( min 4 Max 10 bar) e apre la sede . Togliendo la
corrente la valvola si chiude e l’aria di comando garantisce la chiusura.
Comando a pistone ø51.
Scarica la scheda[:en]Double effect, effective in preventing water hammer
2-way N.c.
connection for CAYRE flange
Piston operated
FESTO control valve operated
This valve was created to avoid water hammer. It is suitable for air, inert
gases, water, refrigerants, diesel and very dense oils. This is a pneumatic valve
actuated by a double effect piston. It can be mounted either vertically or
horizontally.
A control valve (FESTO) is mounted on the top part. This is a 2-way Normally Closed (N.C.) valve, by energizing the Festo valve through current the supply air (min 4 Max 10 bar) opens the passage. The supply air closes the valve when it is de-energized.
Piston operated - diameter ø51.
Download the card[:]
VP12/D70.DE – VP12/3N70.DE (1/2” gas.)
[:it]A doppio effetto adatta per evitare colpi d’ariete
A 3 vie deviatrice o 3 vie 3N
attacco per flangia CAYRE
con comando a pistone
Funzionante con valvola di comando FESTO
Questa valvola è stata creata per evitare i colpi di ariete. Essa è adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi. Questa è una valvola pneumatica con comando a pistone a doppio effetto.
Si può montare sia in verticale che in orizzontale. Essa funziona con una valvola di comando (FESTO) montata sulla parte superiore. La valvola può essere sia 3 vie DEVIATRICE che 3 vie 3N. La valvola devia il passaggio dando corrente alla valvola Festo che fa entrare l’aria di comando (min 4 Max 10 bar). Togliendo la
corrente la valvola si chiude e l’aria di comando porta la sede in posizione originale.
Comando a pistone ø51.
Scarica la scheda[:en]Double effect, effective in preventing water hammer
3-way diverter or 3-way 3N
connection for CAYRE flange
Piston operated
FESTO control valve operated
This valve was created to avoid water hammer. It is suitable for air, inert
gases, water, refrigerants, diesel and very dense oils. This is a pneumatic valve
actuated by a double effect piston. It can be mounted either vertically or
horizontally. A control valve (FESTO) is mounted on the top part. The valve can be either 3-way diverter or 3- way 3N. When the valve diverts the passage, the FESTO valve is energized through current allowing the supply air to enter (min 4 Max 10 bar). The valve closes when de-energized and the supply air brings the seat back to its original position.
Piston operated – diameter ø51
Download the card[:]
VPM/D90.DE 3/4” – 1” – 1”1/4 gas
[:it]A doppio effetto adatta per evitare colpi d’ariete
A 3 vie deviatrice
con comando a pistone
Funzionante con valvola di comando FESTO
This valve was created to avoid water hammer. It is suitable for air, inert gases, water, refrigerants, diesel and very dense oils. This is a
pneumatic valve actuated by a double effect piston. It can be mounted either vertically or horizontally. A control valve (FESTO) is mounted on the top part.
When the valve 3-way diverter diverts the passage, the FESTO valve is
energized through current allowing the supply air to enter (min 4 Max 10 bar). The valve closes when de-energized and the supply air brings the seat back to its original position.
Piston operated – diameter ø70.
Scarica la scheda[:en]Double effect, effective in preventing water hammer
3-way diverter
piston operated
FESTO control valve operated
This valve was created to avoid water hammer. It is suitable for air, inert gases, water, refrigerants, diesel and very dense oils. This is a
pneumatic valve actuated by a double effect piston. It can be mounted either vertically or horizontally. A control valve (FESTO) is mounted on the top part.
When the valve 3-way diverter diverts the passage, the FESTO valve is
energized through current allowing the supply air to enter (min 4 Max 10 bar). The valve closes when de-energized and the supply air brings the seat back to its original position.
Piston operated – diameter ø70.
Download the card[:]
VPM/D70.DE – VPM/3N70.DE 1/2” gas.
[:it]A doppio effetto adatta per evitare colpi d’ariete
A 3 vie deviatrice o 3 vie 3N
attacco manicotto
con comando a pistone
Funzionante con valvola di comando FESTO
Questa valvola è stata creata per evitare i colpi di ariete. Essa è adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi. Questa è una valvola pneumatica con comando a pistone a doppio effetto.
Si può montare sia in verticale che in orizzontale. Essa funziona con una valvola di comando (FESTO) montata sulla parte superiore. La valvola può essere sia 3 vie DEVIATRICE che 3 vie 3N. La valvola devia il passaggio dando corrente alla valvola Festo che fa entrare l’aria di comando (min 4 Max 10 bar). Togliendo la
corrente la valvola si chiude e l’aria di comando porta la sede in posizione originale.
Comando a pistone ø51.
Scarica la scheda [:en]Double effect, effective in preventing water hammer
3-way diverter or 3-way 3N
sleeve connection
Piston operated
FESTO control valve operated
This valve was created to avoid water hammer. It is suitable for air, inert
gases, water, refrigerants, diesel and very dense oils. This is a pneumatic valve
actuated by a double effect piston. It can be mounted either vertically or
horizontally. A control valve (FESTO) is mounted on the top part. The valve can be either 3-way diverter or 3- way 3N. When the valve diverts the passage, the FESTO valve is energized through current allowing the supply air to enter (min 4 Max 10 bar). The valve closes when de-energized and the supply air brings the seat back to its original position.
Piston operated – diameter ø51
Download the card[:]
VPM/M 3/4” – 1” – 1”1/4 – 1”1/2 – 2” gas
[:it]A 2 vie N.C.
attacco manicotto
con comando a membrana
Valvola che consente il controllo di liquidi e gassosi a pressioni elevate con pressioni di comando anche ridotto. Valvola adatta per aria, gas inerti, acqua, refrigeranti, gasolio e oli anche molto densi. La valvola è dotata di una membrana ø160 - ø200 spessore 4 mm. Valvola anti-colpo d’ariete, se accessoriata di ammortizzatore. Tutte le parti esterne in ghisa e ottone sono trattate con vernice epossidica contro agenti atmosferici. Può essere montata sia in verticale sia in orizzontale. La testa di comando può essere orientata a 360°. La valvola a due vie N.C. apre il passaggio facendo pervenire una pressione sulla parte pneumatica (aria, acqua, olio, gas inerti ecc.) min. 4 max 7 Bar, mentre la
chiusura è affidata ad una robusta molla.
Scarica la scheda[:en]2-way N.C.
sleeve connection
diaphragm operated
Valve created to allow control of high pressure fluids and gases even with low control pressure. Valve designed for air, inert gases, water, refrigerants, diesel and very dense oils. It comes with a 4 mm thick ø160 - ø200 diaphragm.
This valve is water hammer safe if equipped with a shock absorber.
All the external cast iron and brass parts are epoxy coated to ensure
corrosion resistance. It can be mounted either vertically or
horizontally. The operator is 360° rotatable. The 2-way N.C. valve opens the
passage allowing pressure (min. 4 max 7 bar) on the pneumatic part (air, water, oil, inert gases etc.), while the closure is regulated by a sturdy spring.
Download the card[:]